Smart thermostats are refined electronic devices that are also called programmable thermostats. These can provide you a high level of control over the operation of the geyser and HVAC system. They also work to turn the system on and off in response to the type of water required. With the following ways, a smart thermostat can help save several hundred dollars a year.
Better monitoring of energy usage – Smart thermostats can give you with a detailed report on the amount of energy that is actually being consumed for heating or cooling. It will help you monitor the energy and money being consumed by geyser or HVAC, according to which the adjustments can be made for more efficient cooling and heating.
Set Points – These are the temperature settings that precisely control the operation of the system. Although these are pre-programmed, however, are adjustable. These can be used to turn up and down the geyser or HVAC system whenever required. Moreover, it can even automatically turn on the system at any point of time with the required temperature.
Hold Feature – Smart thermostats come with “Hold” feature that allows setting the temperature to stay at a certain level over several days. This feature is often useful for commercial facilities that are closed for vacations or for a period of time during renovations or repairs.
Calling a plumbing expert to ensure the system runs appropriately is always recommended!
If you are looking to save on water bills, do not forget to keep these plumbing tips in mind.
Fix Leaks ASAP
If you notice a leaky faucet, fix it right away. Waiting could result in possible water damage and higher water bills. Also, that dripping noise never any fun to listen to.
Conserving water can save money too.
- Turn off the faucet when brushing teeth.
- Run the dishwasher only when it’s full.
- Take 5-minute showers.
- Flush only when the toilet contains solid waste.
- Clean laundry in economy mode or only with cold water.
It’s always a good idea to use a strainer in every drain at home. They keep hair, soap scum, and food out of the pipes. Pour vinegar down the drains and leave it to sit for about ten minutes. Once done, flush it with hot water. Doing this twice a month will prevent clogs.
Updates such as replacing older faucets or shower heads can impact significantly on the bathrooms utility and can lower the water bill.
Avoid putting fibrous foods like celery, corn husks, onions, egg shells, potato peels, and coffee beans. Run water while using the disposal.
It is wise to mark down a quarterly pipe inspection on the calendar. Check for leaks or signs of water damage under sinks, in the basement, under the water heater, and in the crawl space. If you find a leak or corrosion on the pipes it would be best to talk a professional.
A lot of homeowners might have noticed the water dripping from the main water shut-off valve at home and most likely speculate if it is an indication of a larger plumbing issue. Let us have a glance at it in brief.
The packing nut is accountable for making a watertight seal where the valve stem intersects with the water line. So, if there is a leak at the valve stem, it most likely indicates the valve us not shut off all the way.
When tightened, the packing nut on the main water shut-off valve binds down the packing material against the washer to seal off the water. Over time, though, this packing material can get disintegrated or hardened. And, when this occurs, it will not form a solid seal, thus resulting in dripping water through it.
If the water valve still continues to leak at this point, a bad washer may be accountable, which needs to be replaced with the help of professional plumbing experts.
If you are uncertain how to overcome any of these aforementioned plumbing repairs, look no further to hire certified professionals to scrutinize the circumstances of the main water shut-off valve.